Showing posts with label masculine card. Show all posts
Showing posts with label masculine card. Show all posts

Saturday, 25 July 2026

Masculine Wiper Card & More! *VIDEO*

Hello everyone, I've got a fun masculine wiper card to share today plus another quick, easy card.  



Paper Rose Studio Supplies:  Campfire Tales 6x6 Paper Collection 36730, Campfire Tales Basics 6x6 Paper Collection 36763, Campfire Tales 6 x 8" Cut Aparts 36757, Campfire Tales 6x8" Quick Cards Kit 36790, Rainbow Poppies A5 12pc Sentiment Sheets 25603.  Amazon - Holographic Laminating Sheets 

I was inspired by a video Sam Calcott made for the wiper card ( here's the link - https://youtu.be/r1_IEoFreRo?si=zB0NMn8qQuJXf9OM).  It's just a really fun wiper card as there are so many elements popping out and you can orient it in different ways and make it in different sizes.  The Campfire Tales collection is perfect for a masculine card or those outdoor enthusiasts you may know.  

The second card was super quick and easy, but has a very different look with the added holographic sheet.

I hope you will come join me for the video which you can find HERE. 

Thank you for stopping by today and I hope you're having a great day!
 

Tuesday, 12 March 2024

Masculine Golf Cards

Hello again and welcome back! Today I've got a trio of masculine golf cards.  Where I live in Canada, we are right beside the Rocky Mountains and the Forest Trip paper collection by Paper Rose Studio looks just like the area around me.  My husband and four sons all like to go golfing in the mountains, so these cards were just meant to be! Here's a look at the cards I made ...


 
 
For the first and second cards, I chose sections of the 12 x 12" paper that I wanted to use, and trimmed them down to be 5 x 7" each.  I used a little Distress Oxide ink in Mowed Lawn to shade the bottom area in green.  I die cut from white cardstock, about nine of the golfer images.  I stacked three layers of the golfers for each card.  On the middle card, I used Copic markers to colour in the golfer image.
 
For the first card, I attached the mountain scenery paper to the front of a 5 x 7" card base.  Then I trimmed the right hand edge of the card front by 1/2".  I attached one of the decorative strips that come on all the Paper Rose Studio papers to the inside of the card along the right hand edge.  I had added a little Distress Oxide ink in Peacock Feathers to the strip before attaching it.  Then I glued the stacked layers of the golfer and his golf ball in place.  I apologize to any golfers out there if the golf ball is not in the right spot!   Finally, I mounted the sentiment strip on foam tape and adhered it above the golfer.

For the second card, after inking up the bottom in green, I trimmed my panel down to be just under 5 x 7" and mounted it to a 5 x 7" card base.  I adhered the golfer and his golf ball on the front, and then just added the sentiment underneath him, again on foam tape.

For the third card, I used more of the paper strips on the bottoms of the Forest Trip papers.  I laid them in a random pattern on a scrap piece of white cardstock and glued them in place.  Then I trimmed off the side edges and used these to go across the top and bottom of my collage.  This card measures 5 1/2 x 6", so its a bit of an unusual size.  I attached the Forest Trip paper to the top of my card front and then added my collage piece at the bottom.  I glued the golfer in place on the right.  The Celebrate die was cut three times from white cardstock and glued together.  Finally, I glued it in place to the left of the golfer.

So that was three fairly quick and easy masculine cards, and I'm thrilled to have them in my stash now. Thanks for stopping by and I hope you're having a happy, creative day!
 
 
 
 
 

Sunday, 12 March 2023

Love Truck Bunny

Hello again everyone! I've got a fun little card today that I think could possibly be used for a masculine birthday.


Inside of card



Paper Rose Studio Supplies Used:  Love Truck Builder Metal Cutting Die 28843, Trevor and Friends Clear Stamp 26119, Black & White A5 12pc Sentiment Sheets 19023, Happy Birthday Chunky Script Stamp Set 24640

I started this card by creating a background for the truck and bunny to star in.  I'm terrible at drawing so please excuse my very amateurish background!  But I just wanted you to get the impression the bunny was driving down a dirt road, so hopefully, that came across.  The bunny was stamped from the Trevor and Friends stamp set (he's the one at the left elbow of Trevor), and I was careful to wipe away the ink from his arms when I stamped him.  I could still faintly see where his left arm would have been, so I used a Copic pen to fill that arm back in.  After colouring him in with Copic markers, I cut him out.  

I die cut the Love Truck from white cardstock and coloured it in with Copic markers, and I also cut extra hearts to have fall out the back of the truck. I used silver foiled cardstock for the bar across the bottom of the truck.  Once I had the truck assembled, I inserted the bunny into the driver's seat and glued him in place so it looked like he was holding the steering wheel.  I popped the truck up on foam tape for added dimension and then attached it to the background panel. Then I used glue to attach the hearts, making it look like they were falling out the back as he raced by.  The sentiment was cut from the Black & White sentiment sheet, and I just thought it was a really fun and different sentiment to go with the image.

For the inside of the card, I stamped the Happy Birthday sentiment with black ink.  I had stamped and coloured in the Trevor stamp image onto Neenah 80# Solar White cardstock, and coloured it in with my Copic markers. Finally, I fussy cut the image out and glued it into place above the inside sentiment. 

Thank you so much for stopping by today, and I hope I've given you a little inspiration.  That Love Truck is a really sweet little die!

Wednesday, 28 July 2021

Moose Birthday Card

Hello again and thank you for stopping by! I’ve got a simple, one layer, masculine birthday card to share with you today. 



I love this Moose Love stamp set from Gerda Steiner Designs.  The expression on that moose is just priceless! 

I started this card by stamping the moose in a copic friendly ink in roughly the center of my card.  I flicked the grasses on with copic markers (listed below), and just tried to leave a few areas around the moose’s legs to fill in later. I used quite a few shades of yellow-green to add some variation to the grass.  Next, I coloured in the moose and lightly flicked some lighter brown shades down into the grass to help give the image that he was standing in the grass.  I then added some more flicks up around his legs in the grassy colours to finish colouring him in.  I added a few red dots around the grass to look like wildflowers, and used a copic multiliner pen to draw in the fly.  After masking off the moose, I stencilled in the cloudy sky using the Cloud Edger stencil from A Colorful Life Designs. Finally, I stamped and clear heat embossed the sentiment which is in the Moose Love stamp set, before adhering my card front to a card base.  This was a super quick and simple card to make and I think it’s great for a masculine card, so bonus!!

Thank you so much for stopping by and I do hope you’re having a great day! 

Copic markers used:

Moose: E79, E59, E57, E53, E51, E33, R20, R00

Grasses: YG97, YG95, YG63, YG00, R29, R24





Wednesday, 13 January 2021

Masculine Valentines Day Card with Video

Hello, and welcome back. I’ve got a Valentines Day card today that I think is a masculine one.  Every year I get excited about making some pretty pink and red Valentines cards with hearts and flowers, but come Valentines Day, none of these seem appropriate for my husband! So I tried hard not to get out the pink and reds for this one, except for a wee pop of pink on the inside. 





If you would like to see a video of how I made this card, PLEASE CLICK HERE.

I used the cutest frogs I could find, which were the “Frogs” stamp set from Gerda Steiner Designs and used copic markers to colour them in (YG11, YG03, YG17 and G20. For the spots, G94, YG67).  I had a background already made on my gel press so I used that for the background. I just ran it through a geometric 3D embossing folder from We R Memory Keepers after I had stamped on the sentiment which is from the Frogs stamp set. There is actually much more dimension on this card than the above image shows. The white frame is the Wood Frame from Hero Arts and once I had that attached, I adhered the card front to the base. 

For the heart, I dabbed the wet edges in some Distress Oxide ink in Tumbled Glass, Old Paper and Evergreen Bough. On the back, I spritzed the center with water and then carefully tore a hole in the heart. From the front, I kept pulling back the edges until I had a big enough hole for the frog to come out of. I was hoping to make it look like the frog was bursting out of the heart. After attaching the frog and his hands, I mounted the heart on foam adhesive and attached it to the front. Finally, I added some alcohol ink acetate hearts to make it look like the hearts were falling out of the bigger heart. 

On the inside, I used some packaging acetate to cut a 1/2 - 3/4” wide strip for the frog to be mounted on, and used another small piece to attach some hearts above the fogs’ head. I attached all of the acetate with double sided tape and then glued a second diecut behind the frog to sandwich in the acetate. 

For the border, I used two pieces of cardstock, each with a scoreline I made at 1/4” from the bottom, and die cut a cattails border. The back piece needs to be a reverse image, so I diecut this with the wrong side of the cardstock facing up. This border can be anything you want - I think grass, hills or even a heart border would be fun. When I had the border cut, I turned the flaps to the back and creased them with a bone folder. I placed 1/8” double sided tape along the flap. Next, I adhered the leaping frog to the back border piece, glueing it where it touched the grass, and using double sided tape at the bottom. Then I glued the front border to the back border by only glueing together the top third to half of the borders. You need to leave the bottom unattached so it will form the pop up. I stamped my inside sentiment next. Finally, I opened the flaps of both borders so they were straight, removed the backing from the adhesive on the back border, and lined it up so the edge ran along the inside crease on the top half of the card. After pressing it down, I removed the backing on the adhesive on the front border, closed the card and pressed down to make sure it was adhered. 

These inside pop up cards are really easy to do and they add so much fun to the inside of a card. I love that extra little surprise the recipient gets when they open the card. Thanks for joining me for this card and I hope you’re having a great day!



Wednesday, 12 August 2020

Leaping Frog Masculine Birthday Card

Hello again and welcome!  I’ve got a card today that I actually made a while ago, but have since made a video for it, and wanted to share it with you.  I think of this card as being appropriate for a masculine card, so I’m going with that!  It features the adorable frogs from the “Frogs” stamp set from Gerda Steiner Designs  and I added a few images from the “Lucky Duck” stamp set as well.







If  you would like to see a video of how I made this card, I have it posted on my YouTube channel  and you can CLICK HERE to view it.


After copic colouring my images and cutting them out, I added glossy accents to all the frogs eyes and set them aside to dry. To create a shiny green cardstock for the happy birthday circles on the front, I combined some Nuvo glacier paste in Pineapple Delight and Sea Sprite to make a bright green, and spread that out on cardstock in a circle pattern. When it was dry, I used the Simon Says Stamp “Birthday Circle” die to cut it out. I also used this die to cut some circles from black cardstock. I stacked about 3 circles from white cardstock and added a final layer in the green for my center circle, then glued this in the center of my front panel. I glued down portions of circles around this in a mix of the black and green die cuts. I cut the hands from the front frog, trimmed his chest to fit in the circle, and then glued his hands down onto the center ring. Finally, I added dots with some of the copic markers I had used for the images, and added glossy accents to the dots.

For the inside of the card, I watercoloured a small piece of watercolour paper in a mix of blues and greens to make my pond. I used Distress Oxide Faded Jeans to stencil over the water with a stencil from The Crafters Workshop called Mini Sea Bubbles. I freestyle cut this piece to resemble a pond.

I die cut two grassy borders for the triangle pop up. You could use any straight grassy border in your supplies or even make your own border by cutting grass into 2 pieces of cardstock temporarily adhered together. I used a die from Paper Roses called Cattails and Grass border die. I then used brown copic markers to colour the cattails and Distress Oxide in Mowed Lawn for the grasses. I coloured both grassy borders, but for the one in back, remember that you actually colour the wrong side of the die cut. I creased both of these grassy die cuts at 1/4” from the straight edge, creased the folds and added double sided adhesive to the folds.

Next, I adhered the right leg of the leaping frog to a piece of scrap acetate with double sided tape and adhered him to the front grassy border. Then I attached all my other images with glue, being careful not to get excess glue on the grassy areas.

I glued down my “pond” by positioning it 1/4” from the inside crease of my card. Now I could see where to stamp my inside sentiment and this is best done before adding the triangle pop up. I used a sentiment from MFT’S Yay for You set.

I glued together just the top portions of the grassy borders, to just about a quarter to a third of the way down. You need to leave the bottom of these borders unglued so they can form the triangle pop up. Then I removed the backing paper from the back grassy border, and lined it up along the crease on the inside of my card and pressed it down. Finally, I removed the backing paper on the front grassy border and folded my card base up and over the grassy borders and pressed it down. And that was the card done!

This is such a fun card to receive because the inside is so unexpected, and those frogs definitely make it a masculine card - always a bonus!!  I really hope you’ll give this one a try. Hope you have a great day!




Tuesday, 25 February 2020

*Video* Gerda Steiner’s Meerkats on the Lookout

Hello everyone, I’m back with one of my most favourite stamp sets ever!  It’s “Meerkats on the Lookout”  from Gerda Steiner Designs and I’ve had no end of fun with them this last week! I love that these can easily be used for masculine cards because we all know how hard those can be to make.




If you would like to see an HD video on YouTube of how I made this card, please CLICK HERE. Otherwise, you can click on the video below.



To start this card, I created a horizon line in light pencil. I made sure that there was enough room for my meerkat to hide below the horizon behind some rocks. Once I had the horizon, I decided on the placement of my group of meerkats. I stamped the front two meerkats in copic friendly ink and then masked them while I finished stamping the back row of meerkats. I coloured in the meerkats with W3, W1, E31, E53, E40, E27, C2 and C0. I also used a black glaze pen to fill in the eyes and noses. I also stamped and coloured the lone meerkat who comes up, after masking off his arms and adding a cupcake to his hands. I also coloured a couple of the rocks that are in the set and cut them out.

Masking off sky line. 


I then cut a strip (the width of my card) of post it note paper in half lengthwise to create my true horizon. I masked off the meerkats and added one of the strips to make the sky line. I ink blended the sand with Tea Dye Distress oxide ink. Then I removed the post it note paper and lined up the other half over the sand to now colour in the sky. I used MFT’S cloud stencil and Mermaid Lagoon Distress oxide ink to make the sky. Once this was done, I stamped on my sentiments in Versamark ink.

Pencil mark widest point of meerkat. 


I adhered a strip of clear acetate to the back of the lone meerkat. After positioning him where I wanted him to pop up, I pencilled in the width of his ears (his widest part) where I wanted him to come up. I used a T ruler and craft knife to cut a slit here. I inserted the acetate through this slit and worked it up and down a few times to be sure it was wide enough. Then I attached a small strip of cardstock to the bottom of the meerkat to act as a stopper so he wouldn’t pull out through the slit. Finally, I pulled him up through the slit as far as he would go to determine where the top slit needed to go (just above his head). This slit only needs to be as wide as the acetate strip.

Adding a stopper to the bottom of the meerkat. 


I covered over the bottom slit with the rocks, being sure to not glue the middle portion down where the meerkat would pop up. I also die cut a few cloud shapes and placed one of these over the upper slit, again being sure to not glue down the middle portion.

I added part of an African tree die I have from Elizabeth Craft, and a few more clouds to complete my scene. I then adhered my card front to the base, being careful to not adhere any of the moving mechanisms. I also added 2 die cut cloud shapes to the front and back of the top of the acetate to act as a pull mechanism. I had glued in the word “Pull” on the front cloud.

Finally, I added some accents to the sand with copic markers E35, W5 and YG17 for grass. I also used a sparkle pen from Gelly Roll to add a little sparkle to the sand.

I hope you can give this card a try - it’s such a fun card to make and receive - and perfect for the men in our lives!